KS90T Twin Aluminium Stirling Engine

The T-Bar Twin Cylinder mechanism

The KS90T Low Temperature Stirling Engine features a unique and mesmerising T-Bar mechanism, which allows two separate power pistons and displacer discs to be connected to one flywheel. One T-Bar delivers power from the pistons, the other T-Bar drives the displacer discs. Each T-Bar pivots on two precision ball-race bearings, and the oval apertures at the top of the T-Bars actuate one precision ball-race bearing.

Eco-friendly

This KS90T engine is the ultimate eco-friendly device, showing with one spin of the flywheel a clean and simple way of converting waste heat into motion. Because these engines rely on a temperature difference for operation, they will run on almost any heat source. Typical heat sources include hot coffee or tea, warm sunlight, TV digibox and the human hand. As long as one plate is 5°c to 10°c warmer than the other the engine will run. It doesn't matter which plate is warm, as long as the other is cooler. If you warm the bottom plate the engine will run clockwise, if you reverse the temperature differential and warm the top plate the engine will run anti-clockwise.

How does it work?

Stirling engines work by cyclically heating and cooling the air inside the main chamber. As the air heats up it expands, and as it cools down it contracts. This expansion and contraction drives a small piston which in turn drives the flywheel. The clever thing about Stirling engines is that the mechanism for cycling the heating and cooling of the air is built into the engine in the form of the displacer, which is driven by the flywheel and crank arrangement and moves the air from the warm side to the cool side and back again over and over.

The Stirling engine is named after its inventor, Rev. Robert Stirling, who patented his idea in 1816.

Heat Sources

• The engine can run on strong direct sunlight. The top surface will be the hot side and the bottom the cool side and the engine will run anti-clockwise.
• The engine can run on hand heat. If you have a warm hand in a cool room the engine will run from the heat of your hand.
• Placing the engine on top of a freshly made cup tea or coffee (NOT BOILING) will provide enough energy for it to run at a relatively high speed for up to 30 minutes.
• Placing the engine over a bowl of ice will provide enough temperature difference for operation. Similar to solar operation the top surface will be the hot side and the bottom the cool side, and the engine will run anti-clockwise. You can also place a dish of ice on the top plate for clockwise operation.

Main features:

• T-Bar mechanism
• Twin cylinder engine
• Will run on a 5°c to 10°c temperature difference
• Extremely low friction self-lubricating graphite piston
• Built in flywheel balancing
• Main chamber pillars thermally isolated with nylon screws
• Regenerating power piston

Materials

• Stainless steel connecting rods and ball-race bearings
• PEEK connecting rod bushes
• Micron precision borosilicate glass cylinder
• Micron precision graphite power piston
• Aluminium main pillar, hub and spokes
• Brass chamber pillars and flywheel rim
• Brass gland and cylinder holder
• Anodised aluminium plates

Dimensions

• Plates - 92mm diameter, 179mm wide, 3mm thick (3.62" x 7.05" x 0.19")
• Displacers - 70mm diameter, 7mm thick (2.75" x 0.27")
• Flywheel - 82.5mm diameter, 4mm thick (3.25" x 0.16")
• Power pistons - 9.5mm diameter (0.375")
• Overall height - 160mm (6.3")

Assembled or Kit

The engine is available fully assembled and ready to go or as a self-assembly kit.

Instructions

Click the image below for PDF assembly, operation and maintenance instructions for this engine.